Seven Messy Babies

Soap gentle enough for babies, luxurious enough for a spa.

Dandelion Zebra Swirl Challenge

This month’s Soap Challenge Club was most definitely a challenge for me! First of all, my five kids passed around a cold virus during the last month. Yes, it took a full 3 weeks to hit all 5 kids, and a total of 5 weeks for everyone to get well. It was a doozy! Everyone had high fevers with terrible coughing and runny noses. Lots of all-nighters pulled around here, and we’re still not back into a good sleep schedule!

Because of all that, I took a couple of weeks off from soapmaking. I’ve been itching to get back to it after seeing the beautiful soap created by Vinvela Ebony on her blog Dandelion SeiFee, as well as the examples made by Amy Warden, creator of the Soap Challenge Club.

The Dandelion Zebra Swirl is October’s challenge technique. After watching Amy’s great tutorial, I really didn’t expect it to be that hard. But alas, I found this one to be very difficult! To make this soap, I was simply to pour one color of soap into the mold, insert a flexible cutting mat into the mold, pour different colors down the mat to form stripes, and then remove the mat and pour the remaining soap batter to fill the mold. My problem didn’t come with the actual pouring technique, but with the consistency of the soap that I was trying to pour.

Amy suggested using a recipe that was slow to trace as well as a fragrance that isn’t too floral or too spicy. I altered the slow-moving recipe a bit to accommodate the oils that I had on hand, using 35% olive oil, 30% palm oil, 25% coconut oil, 7% sunflower oil, and I also added 3% castor oil because I really love how it boosts lather. I’ve never used this recipe before, so I didn’t really know what to expect. I also added yogurt to the oils as 50% of my liquid.

My first problem: I was making a total of 3 batches that day. Result: I accidentally used the wrong bowl of oils to make my first attempt at the challenge soap! It was my regular soap recipe which has more castor oil as well as avocado oil and shea butter, and it tends to trace pretty quickly. I blended the lye solution and oils (both at room temperature) for just a hair too long and everything got hot and thick really fast! The scent I used was Pixie Dust, and I think it may be a hint too floral as well, perhaps aiding the quick trace. And of course, I didn’t realize I’d used the wrong bowl until I’d already added the fragrance and started coloring the soap.

Here’s a look at pouring my first attempt of the Dandelion Zebra Swirl.

Pixie Dust

See how the soap is too thick already!? And it’s only the first pour… Uh oh.

Pixie Dust

Half way through my “zebra” stripes, and the soap was beginning to pile up. I like the colors, though!

Pixie Dust

Last “pour” of the main soap batter, and look how thick it was! I had to glop it on top and then use a spatula to scrape all the soap down the mat as I pulled it out of the mold.

Pixie Dust

The top turned out beautifully, even if I had no idea what the inside would look like! Of course I christened the soap with pixie dust, a.k.a. iridescent glitter. My girls love how sparkly it is!

Somehow, like usual, the soap turned into soap and the result isn’t nearly as terrible as I expected. Just because it didn’t go as planned doesn’t mean it isn’t a work of art!

Pixie Dust

Look at the picturesque mountain sunset depicted here. This cut of Pixie Dust scented soap is beautiful! The colors in person are quite striking.

Pixie Dust

Here’s another view showing the bright colors and shimmer on top of Pixie Dust soap.

After using the wrong oils as well as using up the fragrance that gave the color and scent combo I imagined, I had to rethink my plans and try again. My second attempt at the Zebra Swirl technique turned out better, but still not quite as easy as I’d have liked. Even with my version of the slow moving recipe, the soap still traced faster than I wanted, and I was unable to get the very fluid pour that Amy had in her video. I had to tamp my mold down after some pours to get the soap to slide down the mat, and at times I had to use a spatula to push it down.

This second attempt is made with Blowing Bubbles fragrance oil. Inspired by the iridescent qualities of bubbles, I chose to color the soap with aqua, blue, purple, pink, and yellow. Like the first soap, I used yogurt as half of the liquid in this recipe as well.

Blowing Bubbles

The first 2 stripes of Blowing Bubbles being poured onto the mat. Thinner than my first attempt, but still not as fluid as I’d like.

Blowing Bubbles

The first set of stripes are complete, and the colors are quite striking!

Blowing Bubbles

Soap’s getting thicker. Uh oh again.

Blowing Bubbles

Getting to the end of the zebra stripes, and I’ve begun tamping the mold and scraping soap down the mat again.

Blowing Bubbles

I really look forward to topping soap with pretty colors!

Blowing Bubbles

Is there anything more fun in life than making pretty swirls on top of soap? Ok, yes. But it really is fun!

Once again, it was difficult to let that soap set up in the mold. I couldn’t wait to see how the inside turned out! It doesn’t look as clean as the examples, but it turned out pretty. I have yet to figure out how Vinvela got her colored stripes all on one side of the soap! Maybe my cutting mat was just too flexible? Or maybe I didn’t pour enough soap in the bottom of the mold first? I’m thinking I didn’t pour enough main batter soap behind the mat before I removed it from the mold, but I’m not certain. Any suggestions you might have are very welcome!

Blowing Bubbles

Blowing Bubbles soap made with the Dandelion Zebra Swirl technique.

Blowing Bubbles Soap

Look, Ma! Two whales kissing! (I had no idea I could create such cool artwork in soap!)

All in all, this was a fun challenge again. I learned a lot, and I’ll keep trying to perfect this technique. I’m going to try some other slow moving recipes to see if I can get the correct consistency for this type of swirl. As usual, I’m really looking forward to seeing what everyone else created! Thanks for stopping by!

0 Comments

  1. mijnzeep1

    Lovely soaps!

    Reply
  2. Amy Warden

    Frustrating when the soap doesn’t behave the way you want it to, but both soaps still look exactly like a Dandelion swirl!! If you want the colored stripes more in the middle, you can pour more of the main soap batter for the first layer before pouring the colored stripes. Looks great!

    Reply
    1. Katy (Post author)

      Thanks, Amy! I appreciate the advice too. I thought I’d poured more than that on bottom first, but apparently not! I’m going to keep trying this technique until I figure it out. So many cool soaps linked up!

      Reply
  3. Dianne Forrester

    They both look great…especially your whales! Lovely colours 🙂

    Reply
    1. Katy (Post author)

      Thanks, Dianne! Isn’t funny what we see?

      Reply
  4. Vicki

    Hey Katy!
    You’ve definitely got the stripes in there, and I love your swirly tops! It is so annoying when the batter thickens up too quickly – I seem to have had that problem (all my fault 😉 ) a lot recently

    Reply
    1. Katy (Post author)

      Me too! The last soap I made that didn’t accelerate too quickly was for the gradient challenge! Everything since has behaved terribly. But it’s all still soap in the end product, and sometimes it evens turns out better than I expected anyway! Thanks for stopping by!

      Reply
  5. Eileen

    You do have kissing whales! How fun is that?!? I’m impressed that you got pictures during the process, I seem to get too into the process and don’t look for my camera until the end. Your colours look great! And so do your whales!!

    Reply
    1. Katy (Post author)

      Thanks, Eileen! Cracked me up to see your dolphins! 🙂 I took my own pictures of the first attempt using my gloved, slippery pinky fingers, but my husband took the pictures of my second attempt. Weird how sometimes I can remember my camera, but not the fragrance oil or the additives…

      Reply
  6. soapjam

    The kissing blue whales are so cute and pretty, and I love the top!
    I also experienced having the soap batter thickening up quite a bit. I tend to play dangerously by using f.o.s I’ve never tried before. :-p

    Reply
    1. Katy (Post author)

      Me too! I constantly try more than one new thing at once. New fragrance and new technique, often along with a new color or two plus a new additive! 🙂

      Reply
  7. byswanee

    both are nice. According to the soap thickness, the swirl does not give the same design, but look good .

    Reply
    1. Katy (Post author)

      Thanks! Yes, it was too thick to give a nice even stripe. I’ll have to try again with more fluid soap!

      Reply
  8. Cris

    I love your kissing whales! How fun to find that when your soap was revealed. I have the same problem keeping the swirl up from the bottom of the mold… going to keep working on that!

    Reply
    1. Katy (Post author)

      Thanks! It is fun to find surprises!

      Reply
  9. maitriscraps

    They are both lovely!

    Victoria
    http://maitribathbody.com

    Reply
    1. Katy (Post author)

      Thanks!

      Reply
  10. Barbora

    Beautiful soaps, I like the colours!

    Reply
    1. Katy (Post author)

      Thank you!

      Reply
  11. Pingback: Soap Embed Challenge | Five Messy Babies

Leave a Comment

Your email address will not be published. Required fields are marked *